cyberMIND - your digital access solution
Now offering High Speed DSL - Nationwide!
Your cyberMIND AccountSupportMonthly Newsletter
-
  Main Menu  
  Search the Web
  Web Directory
  Check your E-mail
   
  Get Help
  Get Dialup Numbers
  Get Internet Tools
   
  Manage Your Account
  Pay Your Bill
  Send Us Feedback
  Contact Info
   
 
 
   
-

Welcome / Support / NT Dialup

How to Setup Dialup for Windows NT


Creating a PPP Phone Book Entry

  • From the Start button, go to the Accessories menu (From Programs). From there, select the Dial-Up Networking menu item.

  • From the window that popped up, click the New button.

    dial up detworking

  • You will now see the Phone Book window. It has several tabs. Select the Basic tab.

  • Type cyberMIND Dialup into the Entry name: box. To get the phone number for your area, please contact cyberMIND at 1-877-373-6680 or you can find the numbers at www.cybermind-usa.net/support.htm.

  • Uncheck Use Telephony Dialing Properties and Use another port if busy.

basic tab

  • Alter the modem configuration by clicking the Configure button. The following items should be set, but they are not imperative.

  • Enable Modem Error Control should be checked

  • Enable Modem Compression should be checked

  • Select the highest possible baud rate your modem can run at.

modem configuration

  • Click the Server tab and set the following items as listed.

server tab


  • Dial-Up Server Type = PPP: Windows NT, Windows®95 Plus, Internet

  • Network Protocols : Only TCP/IP is checked

  • Enable Software Compression : Checked

  • Enable PPP LCP extensions : Checked

  • Setup TCP/IP Settings from the Server tab by clicking the button TCP/IP


Settings. The following must be set...

  • Server Assigned IP Address : Checked

  • Server assigned Name Server Addresses

  • Use IP header Compression and Use default gateway on remote network both checked

tcp/ip settings

  • From the Script tab, make sure the None is Checked.

script tab

  • From the Security tab, check the Accept any authentication including clear text radio button. - You are finished!


Logging in

  • Click the Start button

  • Select the Programs entry, then from the new menu select the Accessories entry.

  • On this menu select the Dial-Up Networking item.

  • From the Dial-Up Networking window, select the PPP entry you created and click the Dial button.

  • The login window will show the status of the login process. Once login is complete you can run things like Netscape, Internet Explorer, etc...

Top of Page

 


Send mail to with questions or comments about this web site. 877.373.6680
Copyright © 1997-2009 cyberM·I·N·D·